LEMA 12241, Перевод оригинальной инструкции

Страница: 17 / 160

- 17 -
1
5-5A
4
3
English (Translation of original instructions)
UNPACKING
Unpack your machine with great care, avoiding any
manoeuvre that could lead to damage.
Once you have unpacked it, make sure all parts are in a good
condition. If you notice any damage, DO NOT use the machine
and contact your retailer immediately.
For reasons concerning packaging and transport, some
parts and optional items may be supplied disassembled. To
assemble them, follow the instructions given in this handbook
in the respective sections.
Contents of the package
Side brush
Keys for starting
Use and maintenance handbook
Declaration of conformity
Warranty coupon
Batteries (if purchased)
Battery connection kit
Battery charger (if purchased)
The DP version also features the operating instructions of the
engine.
If you notice that any of the above are missing, contact your
retailer immediately.
NOTE: To prevent it from getting lost during transport, the keys
have been put inside the envelope containing the technical
literature.
Make sure the packaging materials (bags – cartons – pallets –
hooks – etc.) are put away, out of the reach of children.
Precautions to take before starting the machine:
To facilitate transport, the side brush (or brushes) is not
mounted in its expected working position. To put it in place,
read the – Preparing a new machine – section.
THE CONTROLS AND THE CONTROL PANEL
1) Brake lock pedal and parking brake pedal
3) Flap raising pedal
4) Accelerator pedal
5) Right hand side brush control lever
5A) Left hand side brush control lever
A) - Selection of displayed data
B) - Display
C) - Key and indicator of work programme 1
D) - Key and indicator of work programme 2
E) - Key and indicator of work programme 3
F) - Filter shaker ON button
G) - ON-OFF button and aspirator motor indicator
H) - Side brush speed adjustment knob
I) - Button to start/stop the engine (Dual Version)
L) - Ignition key
M) - Forward/reverse button
N) - Waste bin “full” indicator (Optional)
O) - Claxon
P) - Light switch
Q) - Emergency
R) - Maximum speed adjustment knob
S) - Drive board alarm indicator, identifies the error code
on the board according to the frequency with which the LED
flashes. In the absence of malfunctions, the status LED is
steadily on while the machine is in operation.
PREPARING THE MACHINE
Either in the petrol or in the DP version, the machine calls for a
set of 24 V batteries.
The machine can be supplied in three options:
1. Batteries supplied with the machine, fitted and filled with
acid, ready for use.
2. Batteries supplied and fitted dry (without the liquid
electrolyte).
3. Batteries not supplied.
Raise the bonnet carrying the seat by pushing it forward
towards the steering wheel and check which option applies to
your machine.
If the batteries are fitted, open up one of the vent caps of each