Küenle KFUtronic Series, Инструкция по эксплуатации

Страница: 62 / 74

KFU-
tronic
61
34.110 Slip trimmer Unit:
min: 0
max.: 1.3
Parameter manual:
p. xy Transfer status:
2
def.: 1
own value (to
be entered!) Relationship to
parameter:
33,034
Only for asynchronous motors.
This parameter can be used to optimise or deactivate slippage compensa-
tion.
0 = deactivated (performance as on the grid)
34.130 Voltage control reserve Unit:
min: 0
max.: 2
Parameter manual:
p. xy Transfer status:
2
def.: 0,95
own value (to
be entered!) Relationship to
parameter:
Only for asynchronous motors.
6.4.5 Squared characteristic
34.120 Squared characteristic Unit: integer
min: 0
max.: 1
Parameter manual:
p. xy Transfer status:
2
def.: 0
own value (to
be entered!) Relationship to
parameter:
34,121
Only for asynchronous motors.
The quadratic characteristic curve function can be activated here.
0 = disable
34.121 Flux compensation Unit: %
min: 0
max.: 100
Parameter manual:
p. xy Transfer status:
2
def.: 50
own value (to
be entered!) Relationship to
parameter:
34,120
Only for asynchronous motors.
The percentage by which the flux is to be reduced can be set here.
An overvoltage shutdown can occur if there are any major changes in op-