SAFETY INSTRUCTIONS
1
7
IFC 050
www.krohne.com
09/2016 - 4002184003 - MA IFC 050 R03 en
1.2 Intended use
The electromagnetic flowmeters are designed exclusively to measure the flow and conductivity
of electrically conductive, liquid media.
1.3 Certifications
The manufacturer certifies successful testing of the product by applying the CE mark.
This device fulfils the statutory requirements of the relevant EU directives.
For full information of the EU directives and standards and the approved certifications, please
refer to the CE declaration or the website of the manufacturer.
Other approvals and standards
•
NAMUR recommendations NE 21 and NE 43
WARNING!
If the device is not used according to the operating conditions (refer to chapter "Technical data"),
the intended protection could be affected.
INFORMATION!
This device is a Group 1, Class A device as specified within CISPR11:2009. It is intended for use in
industrial environment. There may be potential difficulties in ensuring electromagnetic
compatibility in other environments, due to conducted as well as radiated disturbances.
CE marking
