6
OPERATION
52
IFC 050
www.krohne.com
09/2016 - 4002184003 - MA IFC 050 R03 en
6.4.2 Menu "B test"
Function
Setting / Description
B1 simulation
B1.1 volume flow
B1.1 mass flow
Depending on the selection, simulation of the volume or mass flow according to the
following sequence:
Select: set value / break (exit function without simulation)
Query: start simulation?
Select: no (exit function without simulation) / yes (start simulation)
B1.2 current output A
Simulation X
[X stands for one of the connection terminals A or D]
Sequence and settings similar to B1.2, see above!
For the pulse output the set number of pulses are displayed once in a second!
B1.3 pulse output D
B1.3 frequency out X
B1.3 limit switch D
B1.3 status output D
B2 actual values
B2.1 operating hours
Display the actual operating hours.
Exit the displayed function with the
^
key.
B2.2 act. flow speed
Display the actual flow speed.
Exit the displayed function with the
^
key.
B2.3 electr. temperature
Display the actual electronics temperature.
Exit the displayed function with the
^
key.
B2.4 act. coil resistance
Display the actual resistance of the field coils.
B3 information
B3.1 C number
This number clearly identifies the electronics.
B3.2 Electronic Revision ER
Reference identification number, electronic revision and production date of the
device; includes all hardware and software changes
B3.3 device serial no.
Serial number of the system.
B3.4 electronic serial no.
Serial number of the electronics.
