Kostal PIKO 1.5 MP, Руководство по эксплуатации

Страница: 6 / 80

2 General information
2.1 General safety instructions
n
This document is part of the product.
n
Install and use the device only after reading and understanding this
document.
n
Always perform the measures described in this document in the
sequence specified.
n
Keep this document in a safe place for the entire service life of the
device. Pass the document on to subsequent owners and operators of
the device.
n
The yield of the system can be reduced through improper operation.
n
If the housing is damaged, do not connect the device to the DC or AC
lines.
n
If one of the following components is damaged, immediately take the
device out of operation and disconnect it from the mains grid and PV
generators.:
– Device (not functioning, visible damage, smoke, penetration of
liquid etc.)
– Lines
– PV generators
Do not switch the system on again before
– the device has been repaired by a dealer or the manufacturer,
– Damaged cables or PV generators have been repaired by a tech‐
nical specialist.
n
Never cover the device
n
Do not open the casing: Risk of death. Invalidation of the guarantee.
n
Factory labels and markings must never be altered, removed or ren‐
dered unreadable.
n
Comply with the instructions of the respective manufacturer when you
connect an external component that is not described in this document
(e.g. external data loggers). Components that are incorrectly connected
can damage the device.
DANGER!
Dangerous voltages can remain present on the components
up to 10minutes after switching off the DC circuit breaker
and the line circuit breaker.
General information
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP 6