manualshive.com logo in svg

Kostal PIKO 1.5 MP, Руководство по эксплуатации

Поделиться
Скачать
Kostal PIKO 1.5 MP Скачать руководство пользователя страница 46

Opening the AC plug:
First, unscrew the rear cable connection. Next, release the safety

clips at the left and right of the plug housing by depressing them

simultaneously with a suitable object. Now, pull the top part of the

housing off the contact element.

1.

Use one hand to press the retaining plate on the mounting plate

approx. 5 mm towards the mounting surface 

①

 (Fig. left).

2.

Use the other hand to push the inverter upwards, far enough so that

the retaining plate no longer latches 

②

. Release the retaining plate.

3.

Lift the inverter with both hands until the hooks on the rear side of the

inverter are free 

③

.

4.

Remove the inverter from the mounting surface 

④

.

Opening the AC plug

(only if required)

Removing the inverter

from the mounting sur‐

face

Installation

 

11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP

 

46

Содержание PIKO 1.5 MP

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды