Kostal PIKO 1.5 MP, Руководство по эксплуатации

Страница: 50 / 80

A numeric setting is displayed (example Date in Fig. left).
1. Press
SET
.
ð
The selected value flashes (
Day
in Fig. left).
2.
Press
rs
to change the value.
3. Press
SET
.
ð
The change is adopted (value no longer flashes)
or
4. Press
ESC
to cancel the change (value no longer flashes).
5.
Press
s
.
ð
The next value is selected.
6. Repeat steps 1 to 4 for the remaining values.
7. Press
ESC
.
✓
The next higher menu level is displayed.
NOTICE!
Risk of yield losses and contravention of regulations and
standards. Inverter and grid parameters can be changed in
the service menu. The service menu must therefore only be
used by technical professionals who know the applicable
regulations and standards.
1. Select the
Service
menu item.
2. Press
SET
.
ð
The fig. shown at the left appears.
3.
Press
rs
simultaneously for 3 seconds.
ð
The service menu is displayed (Fig. left).
4.
Press
rs
to select a menu item.
5. Press
SET
to edit the menu item. The following applies:
n
Enter the password if required (Fig. left); and
Ä
Chapter 3.3.4 „Service menu“ on page 17
n
If necessary, press rs within a menu item to display and edit
other settings (e.g.
Voltage limits
).
n
The menu items are described in
Ä
Chapter 3.3.4 „Service menu“ on page 17 .
Changing numeric set‐
tings
Calling up the service
menu and editing the
values
Operation
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP 50