manualshive.com logo in svg

Kostal PIKO 1.5 MP, Руководство по эксплуатации

Поделиться
Скачать
Kostal PIKO 1.5 MP Скачать руководство пользователя страница 30

4  Installation

4.1  Safety measures during installation

Observe the following safety notes when performing the work described in

Section 

Installation

 .

DANGER!
Risk of death by electrocution!

–

Only technical professionals may perform the work

described in Section 

Installation

 .

–

Do not connect cables to the inverter until explicitly

asked to do so in the manual.

–

Do not open the housing of the inverter.

–

Connect only SELV circuits to the RJ45 sockets.

–

Lay the cables such that the connection cannot come

loose accidentally.

–

When laying cables, ensure that no damage occurs to

any of the constructional fire safety measures in the

building.

–

Make sure that no inflammable gases are present.

–

Observe all applicable installation regulations and stan‐

dards, national laws and connection values specified by

the regional power supply company.

DANGER!
Danger from electrical current
ELECTRICAL SHOCK AND DISCHARGE!
The PV generators/lines may be energised as soon as the

PV generators are exposed to light.

Always

 disconnect all DC and AC cables as follows before starting work

on the inverter:
1.

Set the DC circuit breaker on the inverter to position 

0

. Take mea‐

sures to prevent the system from being unintentionally switched on

again.

2.

Turn the AC circuit breaker to off. Take measures to prevent the

system from being unintentionally switched on again.

3.

Wait for at least 10 minutes before disconnecting the plug-in connec‐

tors of the DC cables.

4.

Disconnect the DC cable plug connectors according to the manufac‐

turer's instructions.

Installation

 

11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP

 

30

Содержание PIKO 1.5 MP

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды