Kostal PIKO 1.5 MP, Руководство по эксплуатации

Страница: 41 / 80

NOTICE!
The following items are only displayed when the use of a
reactive power characteristic curve is prescribed for the
country currently selected in the Country item:
–
Mode
: Type of characteristic curve
Select one of the following types:
-
cos phi = 1
- Q(P)
- Q(U) linear
-
Q(U) hysteresis
–
Loading defaults
1) : A default characteristic curve
can be selected here.
–
Node 1
1)
No. of nodes
1) The nodes provide for free program‐
ming of a characteristic curve.
–
Node 2
1)
–
Node n
1) 2)
–
Display char. curve
1) : Not indicated with mode cos phi = 1.
2) : Is only displayed when
no. of nodes
has been set to a
value > 2.
1. Press
SET
to call up the item.
2.
Press
rs
to select a type of reactive power characteristic curve.
3. Press
SET
.
ð
The reactive power characteristic curve type is adopted.
4. Press
ESC
.
✓
The check list is shown.
NOTICE!
If cosPhi = 1 was not selected, an additional menu item
„Load defaults“
is indicated.
Reactive power
Loading defaults
Installation
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP 41