Kostal PIKO 1.5 MP, Руководство по эксплуатации

Страница: 42 / 80

1.
Press
s
to select "Load defaults".
2. Press
SET
.
3.
Press
rs
to select a default characteristic line.
4. Press
SET
.
ð
The default characteristic line is adopted.
5. Press
ESC
.
✓
The check list is shown.
1. Press
SET
.
ð
The value flashes.
2.
Press
rs
to change the number of nodes.
3. Press
SET
.
ð
The value is adopted.
4. Press
ESC
.
✓
The check list is shown.
NOTICE!
P %
cannot be changed at the first and last nodes (
000 %
,
100 %
).
1.
Press
rs
to select a parameter for the node.
2. Press
SET
.
ð
The parameter value flashes.
3.
Press rs to change the value.
4. Press
SET
.
ð
The change is adopted.
5. Repeat steps 1 to 4 for the other parameters.
6. Press
ESC
.
✓
The check list is shown.
Number of nodes
Node
n
Installation
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP 42