Kostal PIKO 1.5 MP, Руководство по эксплуатации

Страница: 13 / 80

The display reacts slower at very low temperatures.
3.3.2 Information
The information shown on the display is described below using illustrative
examples.
The status display shows the following values:
① Measurement name
② Measurement with units
③ Date is displayed alternatingly with IP address
④
Cover the
Non-confirmed event messages
; for more information, see
Ä
Chapter 7 „Event messages“ on page 55
.
⑤ Animated symbol
Connect
symbol with 2
‑
digit inverter address; indi‐
cates data traffic on the RS485 bus.
⑥ Cover the Power reduction (Derating)
⑦ Cover the Fixed voltage mode activated
⑧
Time
⑨
IP address of the device when a network connection has been estab‐
lished, display alternates with
③
–
⑦
The following applies to the status display:
n
The measurements shown in the status display are defined under
Settings
▶
Meas. values
. Some measurements are always dis‐
played (default setting).
n
Current values are not displayed at night (solar irradiation too low;
example in Fig. left).
Daily, monthly and annual yields can be displayed numerically in a list.
① Yield period (day/month/year)
② Individual yields with period and value (1 per row)
The yield periods contain the following numbers of individual entries:
n
Day yield: last 31 days 1)
n
Monthly yield: last 13 months 1)
n
Annual yield: last 30 years 1)
1)
A yield value of 0 is shown when the inverter was not yet installed at that
time.
Status display
3 4
22
7 8
9
5 6
1
F
Numeric yield (day,
month, year)
Structure and function
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP 13