Kostal PIKO 1.5 MP, Руководство по эксплуатации

Страница: 21 / 80

3.6 Data communication
The device has the following communication interfaces:
n
1x RJ45 socket (Ethernet for TCP/IP grid) for communication, e.g. for
connection to the PIKO Solar Portal via your network.
n
2x RJ45 sockets (RS485 bus) for communication with external devices,
e.g. a data logger
n
1x RJ10 socket (Modbus RTU) for communication e. g. with an external
energy counter
3.6.1 Data
The inverter can transmit a wide range of data to other devices. Some of
this data is shown on the display and certain data is stored in the internal
memory (EEPROM) as described below.
n
Voltage and current of the PV generator
n
Power and current fed into the grid
n
Voltage and frequency of the power grid
n
Energy yields on a daily, monthly and annual basis
n
Error conditions, notes
n
Version information
n
Event messages with date
n
Energy yields on a daily, monthly and annual basis
The storage resolution of the energy yield data is as follows:
Energy yield data Storage resolution/period
10-minute values 31 days
Daily values 13 months
Monthly values 30 years
Annual values 30 years
Total yield permanent
3.6.2 Network (TCP/IP)
Using the TCP/IP interface, the device can transmit yield data and event
messages to the PIKO Solar Portal
www.piko-solar-portal.com
. In the free-
of-charge Solar Portal, the yield data can be displayed graphically.
Displayed data
Logged data (EEPROM)
Structure and function
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP 21