Kostal PIKO 1.5 MP, Руководство по эксплуатации

Страница: 31 / 80

5.
Disconnecting the AC plug from the inverter
⇒
Release safety clip at
the front of the AC plug by depressing it with a suitable object, then
pull the plug out.
6. Check that all pins of the AC plug are free of voltage. Use a suitable
voltmeter for this (do not use a simple neon phase checker).
NOTICE!
Risk of damage to the inverter or derating!
– The mounting location must satisfy the following condi‐
tions:
– The mounting location and immediate environment
are permanently fixed, vertical, flat, non-inflammable
and not subject to constant vibration.
– The permissible ambient conditions are complied
with; Ä
Chapter 9 „Technical data“ on page 63
.
– The following free spaces must be present around
the inverter:
Above/below: at least 200 mm
At the sides/in front: at least 60 mm
– Do not install the inverter in areas where animals are
kept.
– Observe the connection ratings specified on the type
plate.
– The DC cables must not be connected to an earth
potential (DC inputs and AC output are not galvanically
isolated).
NOTICE!
When transmitting data over a public network:
– Transmitting data over a public network may result in
additional costs.
– Data transmitted over a public network is not protected
from unauthorised access by third-parties.
NOTICE!
– Avoid exposing the inverter to direct sunlight.
– The display must be readable on the installed device.
Installation
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP 31