Kostal PIKO 1.5 MP, Руководство по эксплуатации

Страница: 32 / 80

4.2 Mounting the inverter
u Screw the mounting plate to the mounting surface using 4 screws:
n
Use screws (and dowels etc.) appropriate for the weight of the inverter.
n
The mounting plate must lie flat on the mounting surface and the metal
strips at the sides must point forwards (Fig. left).
n
Install the mounting plate vertically with the retaining plate
①
at the top
(example in Fig. left).
NOTICE!
For more information on determining the optimum position
for the mounting plate, refer to the Brief Installation Instruc‐
tions comprised in the delivery, and to the Appendix of this
manual Ä
Appendix „Bore dimension
drawing“ on page 78
.
When the inverter is used in Australia, the national regula‐
tions do not permit the Protection class II symbol to be dis‐
played on the type plate.
①
②
Fig. 7: Position of the sticker for covering the Protection Class II symbol
Completely cover the
Protection class II
symbol using the small
sticker provided, as shown in Fig. 7.
Fastening the mounting
plate
For Australia only: Cover
the
Protection class II
symbol on the type plate.
Installation
11/2017 | DOC01664604 | KOSTAL operating instructions PIKO inverter 1.5 - 4.2 MP 32