Konica Minolta REGIUS 190, Руководство по обслуживанию

Страница: 186 / 220

159
4.4 Error Code
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
04208
GetStatus receipt
time-out - front door
open Front door open Communication
for the purpose of reporting that
the front door is open to the SCB2
was not possible. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
If this problem should reoccur, con
fi rm
that the SCB2(CN5)-MCB2(CN4) con-
nectors are connected and that cables
are not damaged or broken.
04209
GetStatus receipt
time-out - front door
close Front door closed Communication
for the purpose of reporting that
the front door is closed to the
SCB2 was not possible. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
If this problem should reoccur, con
fi rm
that the SCB2(CN5)-MCB2(CN4) con-
nectors are connected and that cables
are not damaged or broken.
04210
GetStatus receipt
time-out - error Error Communication for the pur-
pose of reporting occurrence of
an error to the SCB2 was not pos-
sible. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
If this problem should reoccur, con
fi rm
that the SCB2(CN5)-MCB2(CN4) con-
nectors are connected and that cables
are not damaged or broken.
04211 GetStatus receipt
time-out - Standby Standby Communication for the
purpose of reporting transition to
StandBy condition to the SCB2
was not possible. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
If this problem should reoccur, con
fi rm
that the SCB2(CN5)-MCB2(CN4) con-
nectors are connected and that cables
are not damaged or broken.
04212
GetStatus receipt
time-out - transporting
in erase mode Erasure-mode feeding Communi-
cation for the purpose of reporting
feeding of a cassette in Erasure
mode to the SCB2 was not possi-
ble. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
If this problem should reoccur, con
fi rm
that the SCB2(CN5)-MCB2(CN4) con-
nectors are connected and that cables
are not damaged or broken.
04213
GetStatus receipt
time-out - power OFF
after Ready Power Off after Ready Communi-
cation for the purpose of reporting
ejection of a cassette to the SCB2
was not possible. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
If this problem should reoccur, con
fi rm
that the SCB2(CN5)-MCB2(CN4) con-
nectors are connected and that cables
are not damaged or broken.
04214
RegistrationOK receipt
time-out Reception of either Registra-
tionOK or NoRegistration was not
possible within 10 seconds after
bar code detection. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
If this problem should reoccur, con
fi rm
that the SCB2(CN5)-MCB2(CN4) con-
nectors are connected and that cables
are not damaged or broken.
Error
code Error name Error description Action