Konica Minolta REGIUS 190, Руководство по обслуживанию

Страница: 130 / 220

103
3.2 Set Up of dummy SBC2 program
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
•
If the start up was unsuccessful;
Phenomena Action
"READY" will not appear on the LCD even
after successfully completing initialization of
the REGIUS 190. 1) Check that he dIP SW setting on the MCB2.
2) Check that the cables are properly connected.
3) Restart the "dummy SBC2 program", and check that the
"Starting..." is on the "Information" window is shown in black.
4) Restart the REGIUS 190.
Though "READY" is shown on the LCD
panel of the REGIUS 190, "Starting ..." on
the "Information" window does not change
to screened text. 1) Check that he dIP SW setting on the MCB2.
2) Restart the REGIUS 190.
"COM1 OPEN" is not shown on the "Main"
window, and a message "COM Port not
available" is shown on the pop up.
• Either the COM1 port of the mainte-
nance PC is disabled or occupied by
other application.
1) Select "Setup" --> "Communication Port" in the main window
menu.
2) Select an available port in the combo box for COM ports.