Konica Minolta REGIUS 190, Руководство по обслуживанию

Страница: 179 / 220

152
4.4 Error Code
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
3) Cassette with a barcode that is
not registered or represents
wrong size is inserted.
In the care of 3), remove the cassette,
and reset the printer to READY by per-
forming open/close of front cover.
Return the cassette to the plant.
04022
Justi fi cation R/L sen-
sor NG (at absorption)
1) The Justi fi cation Sensor was
OFF after the completion of
motion by the transport unit to
the absorption position during
cassette absorption.
2) The Justi fi cation Sensor was
OFF after lock release during
cassette absorption.
3) The Justi fi cation Sensor was
OFF after the completion of
motion by the transport unit to
the absorption position during
cassette ejection.
• Check MCB2:CN11-, pins 9 through
11 (Justi
fi cation Sensor- L);
MCB2:CN11-, pins 12 through 14
(Justi
fi cation Sensor-R); and
MCB2:CN17 (Justi fi cation Motor)
• Check the loose of the drive pulley.
Refer to "
2.4.3 Replacement of the
Justi fi cation Motor (PM2), p.55" and
" 3.8 Checking and Adjusting the
Justi fi cation Allowance, p.124"
04023 Justi fi cation R/L sen-
sor NG (during
escape)
1) The Justi fi cation Sensor was
OFF after the completion of
motion by the transport unit to
the Escape Position following
cassette separation.
2) The Justi fi cation Sensor was
OFF after the completion of
erasure.
• Check MCB2:CN11-, pins 9 through
11 (Justi
fi cation Sensor- L);
MCB2:CN11-, pins 12 through 14
(Justi
fi cation Sensor- R); and
MCB2:CN17 (Justi fi cation Motor)
• Check the loose of the drive pulley.
Refer to "
2.4.3 Replacement of the
Justi fi cation Motor (PM2), p.55" and
" 3.8 Checking and Adjusting the
Justi fi cation Allowance, p.124"
04024 Justi fi cation R/L sen-
sor NG (at ejection)
The Justi fi cation Sensor was OFF
after the completion of motion by
the transport unit to the eject posi-
tion during cassette ejection.
• Check MCB2:CN11-, pins 9 through
11 (Justi
fi cation Sensor- L);
MCB2:CN11-, pins 12 through 14
(Justi
fi cation Sensor- R); and
MCB2:CN17 (Justi fi cation Motor)
• Check the loose of the drive pulley.
Refer to "
2.4.3 Replacement of the
Justi fi cation Motor (PM2), p.55" and
" 3.8 Checking and Adjusting the
Justi fi cation Allowance, p.124"
04025
Justi fi cation HP sen-
sor NG
1) A time-out occurred for ON
detection by the HP sensor dur-
ing HP motion processing for
initialization by the justify- cat-
ion.
2) A limit-over occurred for ON
detection by the HP sensor dur-
ing HP motion processing by
the justi
fi cation during cassette
ejection.
Check MCB2:CN11-, pins 29 through 31
(Justi
fi cation HP Sensor) and
MCB2:CN17 (Justi fi cation Motor)
04026
Justi fi cation sensor-R
NG (at initializing)
The right side of the Justi fi cation
Sensor was ON after completion of
HP motion processing for initializa-
tion by the justi
fi cation.
• Check MCB2:CN11-, pins 12 through
14 (Justi
fi cation Sensor- R)
• Check no foreign object is present in
the justi
fi cation guide-R
Error
code Error name Error description Action