Konica Minolta REGIUS 190, Руководство по обслуживанию

Страница: 184 / 220

157
4.4 Error Code
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
04162
Lock start NG Push-up operation could not be
carried out by the lock motor as a
result of a problem in the
fi rm-
ware.
Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
04163
Back plate detect time
NG The eject shutters closed before
the delay time for cassette
descent detection had elapsed
from the start of elevation-section
rise during ejection. The delay
time for cassette descent detec-
tion is too short. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
04164 Notice for erase lamp
ON not reached The timing for switch-On of the
erasure lamp during erase opera-
tion by the subscanning section
was not reported in either Read
mode or Erase mode. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
04165
Notice for erase lamp
OFF not reached The timing for switch-Off of the
erasure lamp during erase opera-
tion by the subscanning section
was not reported in either Read
mode or Erase mode. Open the front door, remove any cas-
sette that may be present inside the
equipment, and then carry out a restart.
Error
code Error name Error description Action