Konica Minolta REGIUS 190, Руководство по обслуживанию

Страница: 213 / 220

186
A.2 DIP Switch Setting
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
A.2.2 DIP Switches on the ADB2 (Analogue/Digital Board)
•
Input Mode Selection
•
Log AMP Input Selection
•
Setting of Reference Current
•
Setting of Polygon CLK
•
High Voltage Setting Mode Selection
•
High Voltage ON/OFF Selection
•
Offset Adjustment Mode Selection
SW1-1 Setting Mode Description
OFF Manual Various settings are made by manual. (use SW1-2 ~ 6)
ON Remote Various settings can be controlled by SCB2.
SW1-2 Setting Mode Description
OFF Ref. Curr. Uses reference current for the input to Log AMP.
ON PMT Uses PMT current for the input to Log AMP.
SW1-3 SW1-4 Setting Mode Description
OFF OFF -50uA Set the reference current at -50uA.
ON OFF -500nA Set the reference current at -500nA.
OFF ON -50nA Set the reference current at -50nA.
ON ON 0A Set the reference current at 0A.
SW1-5 SW1-6 Setting Mode Description
OFF OFF Setting-1 Set the Polygon CLK to 659.3472Hz. (setting except for mam-
mography)
ON OFF Setting-2 Set the Polygon CLK to 329.6236Hz. (setting except for mam-
mography)
OFF ON Setting-3 Set the Polygon CLK to 454.7224Hz. (setting for mammography)
ON ON Setting-4 Set the Polygon CLK to 227.3612Hz. (setting for mammography)
SW2 Setting Mode Description
A Auto. High voltage setting is controlled by the data sent from SCB2.
M Manual High voltage setting is controlled by VR2.
SW3 Setting Mode Description
OFF OFF High voltage OFF.
ON ON High voltage ON.
SW4 Setting Mode Description
A Auto. Setting of offset adjustment is controlled by the data sent from SCB2.
M Manual Setting of offset adjustment is controlled by VR1.