Konica Minolta REGIUS 190, Руководство по обслуживанию

Страница: 145 / 220

118
3.6 Adjusting the Peel-Detection Rollers
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
The peel detection mechanism is laterally symmetric. In this paragraph, explanation is made for the left mecha-
nism.
No Part Name Function
1 Peel Detect Roller When a back plate (Plate) of a thickness greater than speci fi cation is ascending,
it touches the peel detect roller and press it toward the front of the device. When
a plate of standard thickness ascends, it will not touch the peel detect roller.
Because the roller rotates even in contact with the plate, it will not block the
plate to ascend further.
2 Peel Detect Arm-L Sustains the peel detect roller (1) from the left. As the peel detect roller (1) is
pressed, rotates around the axis "A" accordingly. Sensor plunger will start
ascending as it starts rotation.
3 Peel Detect Cam-L Move the position of this sheet plate to adjust the reference position of the peel
detect roller (1).
4 Peel Detect Sensor-L • When the sensor plunger of the peel detect arm-L (2) ascends and sepa-
rates, it switches to "ON", and detects the peeling or warping of the plate.
• As this sensor switches from "OFF" to "ON", the subscanning operation will
immediately stop, and the cassette magnetization plate will descends to the
subscan HP.
5 Peel Detect Sensor
Plate-L Metal plate to which the peel detect sensor-L (4) is mounted. the position of peel
detect sensor-L (4) can be adjusted up and down around the shaft "B" in the
center.
6 Peel Detect Adjuster
Plate Metal plate to make a fi ne adjustment of the peel detect sensor plates-L(5) in
vertical direction. Peel detect screw to push the peel detect sensor plate-L (5)
up and hexagonal nut to secure the screw is attached to this metal plate.
Peel Detect Roller
NG GOOD
Magnetizing
Plate Back Plate +
REGIUS Plate