Chapter 7 RA83/84/85/93/94/95 Series
Graphic Display
Operation Manual
(4) Press the ENT key to fix the selection. The blinking number will become
stationary.
(5) Move the Joystick down to highlight the number shown right to the words
COASTLINE NUMBER and press the ENT key.
(6) Press the Joystick left or right to select the COASTLINE NUMBER from 0
through to 3.
(7) Press the ENT key to fix the selection. The number display will become
stationary.
(8) Move the Joystick up or down to highlight the number (0 - 19) under the
POSITION NUMBER column and press the ENT key to fix the selection.
(9) Use the N/S/E/W and numeric keys (0 - 9) to enter the latitude and longitude
coordinates. If a correction is needed, move the Joystick left or right to highlight
the part for correction and enter new data.
(10) Press the ENT key to fix the entry. The blinking alphanumeric data will become
stationary.
(11) To continue the entry of position data for other position numbers or change the
data, repeat the step (8) and after.
7.3.2 Registering or modifying the MARK data/MARK INPUT MENU
(1) Select the MARK INPUT menu. The following list will be shown, accordingly.
Table 7.4 MARK INPUT MENU
MAP NUMBER
0
POSITION
NUMBER
MARK
SELECT
LATITUDE
N / S
LONGITUDE
E / W
0
1 2
o
3 4 . 5 6 7 N
1 2 3
o
4 5 . 6 7 8 E
1
2
3
4
5
6
7
8
9
(2) Move the Joystick up or down to highlight the number shown right to the words
MAP NUMBER and press the ENT key. The number will blink.
(3) Move the Joystick left or right to select the MAP NUMBER, 0 or 1.
(4) Press the ENT key to fix the selection. The blinking MAP number will become
stationary.
7-6
93142105-02
