KNIGHT D-SERIES SERVO HOIST OPERATION MANUAL
SECTION 2
INSTALLATION
4
2.
INSTALLATION
Prior to installation, visually inspect the Servo Hoist for signs of damage or missing parts.
CAUTION
Prior to installation, the chain must be lubed using a SAE 50 to 90 EP oil.
Follow the procedure detailed in section 4.4.3 “Chain Lubrication”
of this manual.
Knight Global recommends the use of Demag Chain Grease.
The part number of the Demag Chain grease tube is 665 009 44.
CAUTION
Prior to placing this unit into service, the owners and user are advised
to examine specific local and/or other regulations, including ANSI and
OSHA regulations that may apply to the use of this product.
WARNING
A falling load can cause injury or death. Before installing this hoist read
the “Safety” section of this manual.
Follow all procedures in this section for installation and set-up of the Servo Hoist.
Retain all product information supplied with the Servo Hoist for future reference.
Ensure that the supporting structure is able to support the weight of the system and load. The structure
should be able to support 300 percent of the combined weight of the Servo Hoist and load. Do not use a
supporting structure that tilts the Servo Hoist to one side or the other.
For safe and proper installation into a rail system, refer to the installation manual provided by the rail system
manufacturer.
When installation is complete and prior to placing the Servo Hoist into operation, inspect the Servo Hoist
following the instructions in section 4.4.2.1 “Recommendations for Periodic Inspections” in the
“Maintenance” portion of this manual.