background image

 

 

  

40 

Technical Manual

Kingspan SHE Control Panel TRZ Plus 

2A and TRZ Plus Comfort

12/24999513

Technical Data

Authorisations and certifications

CE compliant:  

 in accordance with EMV directive 2004/108/EG and the low voltage 
directive 2006/95/EG

Class of protection:  

Class I in accordance with DIN 61140 (DE 0140-1)

Type tested:  

TÜV, Registration-No. 44 780 09 375661,

 

DIN EN 61010-1; DIN EN 61010:2002-11; DIN EN 61010:2004-01 for  

 

TRZ Plus, TRZ Plus Comfort, Compact Control panel 2A

Material

Housing:  

TRZ Plus 2A: (Polystyrol), plastic housing for surface mounting

 

TRZ Plus Comfort: (Polystyrol), plastic housing for surface mounting

 

TRZ Plus 2A/UP: steel plate door, plastic installation frame

Colour:  

TRZ Plus 2A and TRZ Plus Comfort:   grey, similar to RAL 7035

 

 

 blue, similar to RAL 5005

 

 

yellow, similar to RAL 1018

 

 

orange, similar to RAL 2011

 

 

red, similar to RAL 3000

 

Compact Control panel 2A:  

grey, similar to RAL 7035

 

Compact Control panel 2A/M:  

traffic white, similar to RAL 9016

Halogen-free:  

yes

Silicon-free:  

yes

RoHS compliant:  

yes

Optional additional modules TRZ WRMAS

(as standard included in the TRZ Plus Comfort)

Wind rain detector output

Voltage:  

24 V nominal, 20 V to 30 V DC

Power:  

max. 100 mA, 100 % ED

Terminal:  

max.1 mm², screw terminal

Cable monitoring function:  

no

max. Pieces:  

1, Type WRM / RM /WRM2 / RM2

Emergency power:  

no

Fuse:  

no

Free transmission

SHE-activation:  

Closing contact: max. 30 V DC / 0.5 amp

collect. Malfunction:  

Opening contact: max. 30 V DC / 0.5 amp

When dimensioning the power supply and the cable cross-sections for the supply lines to the motors as a function of the
drive used, the increased currents associated with start-up torques must be taken into account!
Trouble-free and safe operation is only warranted when used in conjunction with appropriate manufacturers components.
Request a technical conformity declaration when using drives from other manufacturers.

Duty of information in accordance with § 18 of the EU battery directive (pageG):

Relating to the sales of non-rechargeable and rechargeable batteries we as traders are obliged in accordance with the
EU battery directive to inform you as consumers of the following:
- Every end consumer is legally obliged to return non-rechargeable and rechargeable batteries!
- These can be returned after use to our factories, or to a communal collection point.
Markings are applied to batteries containing hazardous substances, consisting of a crossed out waste bin, and the chemical 
symbol (Cd, Hg or Pb) for the heavy metal that determines the classification of the hazardous substances contained.

Содержание Compact Control Panel 2A










































Отзывы: