35
Technical Manual
Kingspan SHE Control Panel TRZ Plus
2A and TRZ Plus Comfort
12/24999513
Service Port Software
1. General information about Service Port
Software
Additional parameters can be added to certain functions via
the Service Port (PC interface) with the appropriate Service
Port configuration software as well as a USB connecting
cable*. The functions are dependent on the PC software
version and the ventilation control panel firmware.
To alter a configuration via the service port interface the
Service port USB cable must be connected to the SHEcontrol
panel type TRZ Plus or Compact control panel 2A and the
PC. Before configuration, both the Service Port Software
and also, where relevant, any further drive files for the
connection cable must be installed and working.
See relevant software installation instructions. The SHE
control panel should be connected to mains voltage during
configuration. From version 01.04.00 onwards the control
panel type TRZ Plus or Compact control panel 2A can be
configured via the Service Port Software.
After starting the Service Port Software and clicking the
“Search“ button, the configuration screen is automatically
launched. This interface is also used for the configuration of
the compact control panel 2A and 2A / M.
The existing configuration of the TRZ Plus can be read by
clicking the “Read” button. The “Write” button can be used
to transfer the amended parameters and configuration data.
The “Default“ button restores the original Restore factory
settings.
On the Configuration page the
current factory setting
“Ventilation close automatic“,
“Ventilation lift limit actuator“,
“Pole change Time“
and
“ DIP
switch setting
“is displayed.
If a fault message present,it is
displayed in the field
“Error“
On the info page are details of the
SHE control system for example, the
series no. or the software version
displayed.
* supplied with the Service Port Software package.
Service Port USB cable
green Lettering