Kikusui PLZ-4W Series, Руководство пользователя

Страница: 24 / 218

2-4 Installation and Preparation PLZ-4W
■
Do not place objects on top of the unit.
Placing objects on top of the unit can cause failures (especially heavy objects).
■
Do not place the unit on an inclined surface or location sub-
ject to vibrations.
The unit may fall or tip over causing damages and injuries.
■
Do not use the unit in a location where strong magnetic or
electric
fi elds are nearby or a location where large amount of
distortion and noise is present on the input power line wave-
form.
The unit may malfunction.
■
Do not use the unit near highly sensitive measuring instru-
ments or transceivers.
The noise generated by the unit may affect them
■
Secure adequate space around the power plug.
Do not insert the power plug to an outlet where accessibility to the plug is poor.
And, do not place objects near the outlet that would result in poor accessibility to
the plug.
2.3 Precautions When Moving the Unit
When moving the unit to the installation location or when transporting the unit, note
the following points.
■
Turn off the POWER switch.
Moving the unit while the power is turned on can cause electric shock or damage to
the unit.
■
Remove all wiring.
Moving the unit with the cables connected can cause wires to break or injuries due
to the unit falling over.
■
Hold the handle.
When lifting the unit, hold the handle on the side or top panel.
■
When transporting the unit, be sure to use the original pack-
ing materials.
Otherwise, damage may result from vibrations or from the unit falling during trans-
portation.