Kikusui PLZ-4W Series, Руководство пользователя

Страница: 97 / 218

PLZ-4W Applied Operation 6-7
Fig. 6-3 Keys for the setup memory
6.2.1 Saving to the Setup Memory
1. Select the setup memory.
First, set the operation mode, range, and settings as desired.
Next, press the STORE (SHIFT+RECALL) key.
The STORE key blinks.
The setup memory store screen appears. The store screen shows the last
number of the memory to which settings were saved previously (0 by
default).
2. Select the memory number.
Turn the rotary knob to show the number of the memory to which settings are
to be saved.
3. Enter a memo.
Press the CURSOR key. The cursor blinks below the number. Turn the rotary
knob in this condition to select a character.
After selecting a character, press the key to move the cursor to the right, and con-
tinue entering characters. To move to the left, press the key. You can register up to
15 characters.
• You can return to the memory number selection by pressing the CURSOR key
when entering characters.
• If you press the PREV (SHIFT+ ) key or STORE (SHIFT+RECALL) key, the
settings are not saved to the setup memory, and the display returns to the basic set-
ting entry condition (the characters “SET” is highlighted).
SWITCHING
165W
ELECTRONIC LOAD
1.5 - 150V 0 - 33A
PL Z164W
ENTER
SHORT
EDIT
SLEW RATE
RUN / STOP
UVP
PAUSE
STORE
RECALL
A B C
LOAD
Th/TL
FREQ / DUTY
MENU
PRESET SEQ
I
LEVEL
VRANGE
RANGE
SW ON
+CV
MODE
LOAD
SET / VSET
LOCK
LOCAL
CURSOR
COARSE / FINE
SHIFT
ABC
OPP / OCP
PREV
DEL
INS
NEXT
0.00
mA
0.000
V
0.000
W
CC
0.000
A SET
H 33A 150V
No. 1
STORE
ENTER
No. 1:Pro g ram1
SLEWRATE
1.012
A /
μ
s
Memo entry area
NOTE