Kikusui PCZ1000A, Руководство по эксплуатации

Страница: 81 / 100

PCZ1000A
5-3
5
Maintenance and Calibration
• Clogged filters hinder cooling inside the PCZ1000A which can
cause malfunctions and shorten the service life.
• When the PCZ1000A is in operation, air is sucked through the dust filter
to cool the inside. If moisture is present in the dust filter, the temperature
or humidity inside the PCZ1000A increases and may cause a
malfunction.
Removing and reattaching the louver
1
Remove the louver from the front panel.
To remove the louver, push down on the lugs at its base, then pull the louver toward
you.
Fig.5-1 Removing the Louver
2
Clean the front panel louver
Use a vacuum cleaner to remove any dust or dirt from the dust filter. If particularly
dirty, clean with water-diluted neutral detergent and then leave to fully dry.
Reattaching the louver
3
Align the projections at its upper section with the recessed parts of the
instrument.
4
Fit the lower section onto the PCZ1000A.
5
Push up the lugs.
5.2 Calibration
The PCZ1000A was fully calibrated before shipment from our factory. However,
recalibration may be necessary after long-term use.
Contact your Kikusui agent or distributor to arrange for calibration.
CAUTION
Pull down on the lugs and
pull the louver toward you.