Kikusui PCZ1000A, Руководство по эксплуатации

Страница: 75 / 100

PCZ1000A
4-7
4
Remote Control
*1 Default values are shown underlined.
*2 The value is different if in parallel operation.
*3 Example: Returns NORMAL, 0, 0 when standalone operation. Returns SLAVE,
PARALLEL, 0 when in slave mode in parallel operation.
Header Name Data Operation
LOAD
0(OFF)
*1
Turns the load (current) off
1(ON) Turns the load (current) on
LOAD? - Returns "0, 1"
CCRP
1 Enables CC mode
2 Enables CR mode
3 Enables CP mode
CCRP? - Returns "1, 2, 3"
CRRANGE
0 Sets the CR-mode range to "L"
1 Sets the CR-mode range to "H"
CRRANGE? - Returns "0, 1"
ISET
0 A to 10.50 A
*2 Sets an ISET value
ISET? - Returns an ISET value
RSET
H range:
0.9000 Ω to 1 000.0 Ω
*2
Sets an RSET value
L range:
9.0000
Ω
to 1 0 000
Ω
*2
RSET? - Returns an RSET value
PSET
45 W to 1050 W
*2
Sets an PSET value
PSET? - Returns an PSET value
CF
0(OFF) Disables the crest factor
1(ON) Enables the crest factor
CF? - Returns "0, 1"
CFSET 1.4 to 4.0 Sets a CREST FACTOR value
CFSET? - Returns a CREST FACTOR value
CURR? - Returns the RMS value of the input current
CURP? - Returns the peak value of the input current
VOLT? - Returns an input voltage value
SYSCON? -
Returns the following settings:
*3
NORMAL/MASTER/SLAVE,
PARALLEL/TRACKING,
Number of parallel units
ALMCLR - Clears the alarm
Header
Name
2 Units 3 Units 4 Units 5 Units
ISET 0 A to 21.00 A 0 A to 31.50 A 0 A to 42.00 A 0 A to 52.50 A
RSET
H range:
0.450 0
Ω
to
500.00 Ω
H range:
0.300 0
Ω
to
333.33 Ω
H range:
0.225 0
Ω
to
250.00 Ω
H range:
0.180 0
Ω
to
200.00 Ω
L range:
4.500 0 Ω to
5 000.0
Ω
L range:
3.000 0 Ω to
3 333.3
Ω
L range:
2.250 0 Ω to
2 500.0
Ω
L range:
1.800 0 Ω to
2 000.0
Ω
PSET
90 W to 2 100 W 135 W to
3 150 W 180 W to
4 200 W 225 W to
5 250 W