Kikusui PAN 110-1.5A, Руководство по эксплуатации

Страница: 64 / 160

4-4 PAN-A
3. Use a wire stripper to remove the covering from wires.
Remove the covering from each wire over a distance of 7 mm to
10 mm (9 mm is recommended). Use of the strip gauge on the
top or rear panel of the unit, or that shown in Fig.4-2, allows you
to remove the required amount of covering from a wire.
4. Insert wires into control terminals as shown in Fig.4-2
Fig.4-2 Connection to the control terminals
• The potential of the control terminals is nearly the
same as that of the + (pos.) output terminals of the
unit. If part of the wire extending off a control termi-
nal makes contact with the chassis, electric shock or
internal circuit breakage may be caused. Insert
wires into the terminals in such a way that bare parts
are not exposed.
Fig.4-3 Connecting precautions
5. Remove the screwdriver from the terminal, and pull the
wire gently to ensure that it is securely inserted.
Insert the wires by
pressing these parts
with a screwdriver.
Insert a 9 mm-
stripped wire here.
Strip gauge
WARNING
Normal Hazardous Hazardous