background image

1

warema_866217_alhb_en_v6•2022-07-01

We reserve the right to make technical modifications

General information

Fig. 1 

 Floor distribution control Standard (GA) Standard for  

four facades

A power supply unit for supplying the control voltage of the 

downstream motor control unit is integrated in the GA unit. 

The GA unit can be used to operate the motor control units 

of up to 4 facades either via a higher-level central control 

or facade-by-facade on a floor through floor switches.
Commands of the central control take precedence over 

the local floor switches and are passed on directly to the 

motor control units. The local floor switches are blocked by 

a central command.

Intended use

The Floor distribution control Standard (GA) Standard was 

developed to control sun shading systems. The approval of 

the manufacturer must be obtained for uses outside of the 

purposes listed in these instructions.

Safety instructions

WARNING

The electrical installation (assembly)/dis-

mantling must be performed by a certified 

electrician in accordance with the electri-

cal installation regulations published by 

the Association of German Electrical Engi-

neers (VDE 0100) or the standards and reg-

ulations of the country in which the device 

is being installed. The electrician must ob-

serve the installation instructions included 

with the supplied electrical devices.

WARNING

If hazard-free operation cannot be as-

sumed, the device may not be started or 

must be deactivated. This assumption is 

justified if:

 

  

the housing or the connecting lines show 

signs of damage, 

 

 

the device is no longer working.

WARNING

It is important to comply with the following 

points in the interest of personal safety.

  Make sure that no persons or objects are located in the 

path of any driven parts (blinds, roller shutters, etc.)!

  Disconnect the MSE from the operating voltage if cleaning 

or other maintenance work must be performed!

Electrical connection

An on-site overload current protection device (fuse) and a 

disconnecting and isolating switch to switch off the entire 

system must be provided.

Operating and installation instructions

GA Standard for 4 facades  

Valid from  

1. February 2022

Keep for future use..

Отзывы: