Kikusui PAN 110-1.5A, Руководство по эксплуатации

Страница: 26 / 160

1-8 PAN-A
1.3 Precautions for installation
Be sure to observe the following precautions when installing the unit.
■
Do not use the unit in a fl ammable atmosphere.
To prevent explosion or fi re, do not use the unit near alcohol or thin-
ner, or in an atmosphere containing such vapors.
■
Avoid locations where the unit is exposed to high tempera-
ture or direct sunshine.
Do not locate the unit near a heater or in areas subject to drastic tem-
perature changes.
Operation temperature range: 0
˚ C to 40 ˚ C (32 ˚ F to 104 ˚ F)
Storage temperature range: -10 ˚ C to 60 ˚ C (14 ˚ F to 140 ˚ F)
■
Avoid locations of high humidity.
Do not locate the unit in high-humidity locations, i.e., near a boiler,
humidi
fi er, water supply, etc.
Operation humidity range: 10 % to 90 % RH
Storage humidity range: 0 % to 90 % RH
Dew condensation may take place even in the operation humidity
range. In such a case, do not use the unit until the dew dries up com-
pletely.
■
Do not place the unit in a corrosive atmosphere.
Do not install the unit in a corrosive atmosphere or one containing
sulfuric acid mist, etc. This may cause corrosion of various conduc-
tors and imperfect contact with connectors, malfunction and failure,
or in the worst case, a
fi re.
Modi fi cation may allow the unit to cope with such an atmosphere. If
the unit is to be used in such an atmosphere, contact your Kikusui
agent.
■
Do not locate the unit in a dusty location.
Otherwise, this may result in electrical shock or fi re.
■
Do not use the unit where ventilation is poor.
The unit employs a forced air cooling system. Air is taken in from
intake ports located on the unit's sides and front, and is exhausted
from the rear. Prepare suf
fi cient space around the unit so that the
intake ports and exhaust port are always completely unobstructed.
Do not install the unit with its front panel positioned upward or down-
ward.