Kikusui PAN 110-1.5A, Руководство по эксплуатации

Страница: 14 / 160

P-2 PAN-A
Introduction of the products
The PAN-A series is an automatic constant voltage/constant current
shifting regulated DC power supply equipped with the phase control
pre-regulator. A series regulator system is used to assure low-noise
and stable output.
The PAN-A series are featured with the following points.
• The two distinctly visible LED display units on the front panel dis-
play output voltage, output current and various preset data.
• The output control potentiometer (for voltage and current preset-
ting) is of a 10-turns wire-wound design, and allows precise setting.
• For both the front and rear panels, the output terminals can be
equipped with a cover for safety.
• Using external voltage or external resistor, output voltage and cur-
rent can be remote-controlled.
For remote-control operations using an external voltage, you can
also perform adjustments output using the knob on the front panel.
• The remote control and remote sensing terminals use screwless ter-
minal boards, which facilitates wiring.
• Using the Kikusui power supply controller with the control board
allows you to construct an automatic tester and other systems.
• The PAN-A series uses a choke input smoothing circuit in the phase
control pre-regulator; input apparent power is less than for capaci-
tor input smoothing circuits, improving the power factor at low out-
puts.
• High-speed transient response of 50 μ s allows it to follow a sudden
load change.
• Carefully selected parts, improved circuit, and forced air cooling
heat dissipation combine to produce an excellent low temperature
drift of 100 ppm/
˚ C (TYP value).