Kikusui KFM2151, Руководство по эксплуатации

Страница: 52 / 112

3-1 8
KFM2151
Operation
3.11 Initializing to Factory Default Settings
This section explains factory default settings of the KFM2151 and how to initialize
to factory default settings.
■
Factory default settings
Table 3-7 shows the factory default settings of the KFM2151.
Ta b le 3-7 factory defa u lt settings
■
Initializing to factory default settings
The KFM2151 stores the settings entered from the panel through the backup
function.
To initialize to factory default settings, turn the POWER switch on while holding the
SHIFT key down. The buzzer sounds, and the KFM2151 powers up. The parameters
in Table 3-7 are initialized to factory default settings.
3.12 Switching from Remote to Local Mode
Pressing the LOCAL key when the KFM2151 is being controlled remotely causes
the KFM2151 to switch to panel operation (local mode). The REMOTE LED
illuminates when the KFM2151 is being controlled remotely.
Parameter Factory defa u lt setting
CO N FIG
RS232C
Ba u d rate 19200 b ps
Data length 8 b its
Stop b it 2 b its
Ackno w ledge message OFF
Unit n u m b er 0 (master)
Setting
(Channels 1
to 32)
V OLT
Scanned so u rce O N (scanned)
O V P 200.00 V
U V P -2.00 V
RA N GE AUTO
TERM+
The SE N SI N G terminal n u m b ers and
logical channel n u m b ers match.
TERM-
IMP
Scanned so u rce O N (scanned)
TERM+
The SE N SI N G terminal n u m b ers and
logical channel n u m b ers match.
TERM-
Monitor
IMP/ V OLT selection V OLT
V OLT 1 CH
IMP 1 CH