Kikusui KFM2151, Руководство по эксплуатации

Страница: 44 / 112

3-10
KFM2151
Operation
Setting the channel assignments
Fig.3-7 Example of the display sho w n w hen assigning channels
1.
Check that the KFM2151 is in monitor mode.
If the CHANNEL display or VOLT/TERM display is blinking, press the MON key.
2.
Press the IMP/ V OLT key.
Select impedance (IMP) or voltage (VOLT).
The IMP LED and VOLT LED illuminate alternately each time you press the IMP/
VOLT key.
3.
Press the and keys or SHIFT+ and keys to select the
channel n u m b er.
4.
Press SHIFT+TERM to make TERM- b link.
The TERM LED illuminates in green. The left two digits of the VOLT/TERM display
correspond to TERM-, and the right two digits correspond to TERM+.
TERM+ and TERM- blinks alternately each time you press SHIFT+TERM.
5.
Press the and keys or SHIFT+ and keys to select the
terminal n u m b er (1 to 32).
A buzzer sounds if the selectable range is exceeded.
6.
Press SHIFT+TERM to make TERM+ b link, and set it in the same
manner.
7.
Press SHIFT+TERM to confirm.
TERM- blinks again.
8.
Press the MO N key.
The KFM2151 enters monitor mode. To set other channels, repeat steps step 2 to step
7 .
IMP IMP
VOLT VOLT
V V CH CH
OVP OVP
UVP UVP
RANGE RANGE
TERM TERM
VOLT TERM CHANNEL
Channel number TERM+ TERM-
Illuminated