Kikusui KFM2151, Руководство по эксплуатации

Страница: 39 / 112

KFM2151
3-5
Operation
Scanned source
Scanning is performed in order from the smallest channel number. In the example of
Table 3-1, scanning progresses from left to right. Scanning is performed on channels
whose scanned source turned ON (enabled). Scanning is skipped for channels that
are turned OFF (disabled). In this example, CH3 is skipped and continues to CH4.
The VOLT/TERM display blinks.
V al u e: O N Scanned
OFF N ot scanned
Voltage protection (only for voltage scanning)
Set the overvoltage protection (OVP) and undervoltage protection (UVP).
V al u e: -2.00 V to 200.00 V
Resol u tion: W hen u sing the key 10 m V
W hen u sing SHIFT+ 1 V
A buzzer sounds if the selectable range is exceeded.
Range setting (only for voltage scanning)
Set the range.
V al u e: 2 V , 20 V , 200 V , or AUTO
Ta b le 3-2 Meas u rement Range and A u to Range
Range Meas u rement Range
A u to Range
Range Do w n Range Up
200 V -199.99 to 199.99 10 V or less N one
20 V -19.999 to 19.999 1 V or less 20 V or higher
2 V -1.9999 to 1.9999 N one 2 V or higher
Ta b le 3-1 Scanning operation (example)
Logical channel n u m b er CH1 CH2 CH3 CH4
Scanned so u rce O N O N OFF O N
Scanning Exec u ted Exec u ted Exec u ted