Status Tutorial
This section provides a detailed description of the individual registers and register groups. The status
diagram at the end of this topic shows how the status registers and groups are interconnected.
Status Registers
The Operation and Questionable status groups use four different type of registers to track qualify, flag,
and enable instrument events.
l
A Condition register continuously monitors the state of the instrument. The bits in the condition
register are updated in real time and the bits are not latched or buffered
l
An PTR/NTR register qualifies the signal that passes to the event register. When a PTR bit is set,
signals with positive edge transition pass to the event register. When an NTR bit is set, signals
with a negative edge transition pass to the event register. When both bits are set, all signal pass.
When neither bits are set, no signals pass.
l
An Event register latches the various events from the condition register. There is no buffering in
this register; while an event bit is set, subsequent events corresponding to that bit are ignored.
This is a read-only register
l
An Enable register defines which bits in the event register will be reported to the Status Byte
register group. You can write to or read from an enable register.
To program individual bits in any register group, you must send a value that corresponds to the binary-
weighted value of all the bits that you wish to enable. For example, to enable bit 2 (decimal value = 4)
and bit 4 (decimal value = 16), the corresponding decimal value would be 20 (4 + 16).Similarly, any
register queries return the binary-weighted value of the bits that have been set. For example, with bit
3 (value 8) and bit 5 (value 32) being set, the query r40.
Operation Status Group
These registers record signals that occur during normal operation. The group consists of a Condition,
PTR/NTR, Event, and Enable register. The outputs of the Operation Status register group are logically-
Keysight N6705C Operating and Service Guide
349
7 SCPI Programming Reference
Содержание N6705C
