Keysight Technologies N6705C, Руководство по эксплуатации и обслуживанию

Страница: 330 / 476

l
*CLS does not clear the enable register, but does clear the event register .
STATus:QUEStionable:NTRansition < value >, (<@chanlist>)
STATus:QUEStionable:NTRansition? (<@chanlist>)
STATus:QUEStionable:PTRansition <
value >, (<@chanlist>)
STATus:QUEStionable:PTRansition? (<@chanlist>)
Sets and queries the value of the NTR (Negative-Transition) and PTR (Positive-Transition) registers.
These registers serve as a polarity filter between the Questionable Condition and Questionable Event
registers.
When a bit in the NTR register is set to 1, then a 1-to-0 transition of the corresponding bit in the
Questionable Condition register causes that bit in the Questionable Event register to be set.
When a bit in the PTR register is set to 1, then a 0-to-1 transition of the corresponding bit in the
Questionable Condition register causes that bit in the Questionable Event register to be set.
STATus:PRESet sets all bits in the PTR registers and clears all bits in the NTR registers.
Parameter Typical Return
A decimal value that corresponds to the binary-weighted sum of the bits
in the register. <bit value>
Enable bit 3 and 4 in the questionable NTR register: STAT:QUES:NTR 24, (@1)
Enable bit 3 and 4 in the questionable PTR register: STAT:QUES:PTR 24, (@1)
l
If the same bits in both NTR and PTR registers are set to 1, then any transition of that bit at the
Questionable Condition register sets the corresponding bit in the Questionable Event register.
l
If the same bits in both NTR and PTR registers are set to 0, then no transition of that bit at the Ques-
tionable Condition register can set the corresponding bit in the Questionable Event register .
l
The value returned is the binary-weighted sum of all bits set in the register.
7 SCPI Programming Reference
330 Keysight N6705C Operating and Service Guide