190 / 216
Opis ogólny
2017/04
010-989
3
Opis ogólny
3.1
Zastosowanie
Pompy firmy KESSEL AG tłoczą domowe, komunalne i przemysłowe ścieki, fekalia i osady, również zawierające
duże ilości zawiesin i ciał stałych oraz wszelkiego rodzaju brudną wodę. Od małych budynków domowych poprzez
budynki przemysłowe aż po duże stacje pomp i oczyszczalnie ścieków. Pompy mogą toczyć abrazyjne czynniki oraz
wodę powierzchniową. W przypadku mocno abrazyjnych składników takich jak żwir do betonu i piasek konieczna
jest ochrona wirnika i obudowy pompy przed zbyt dużym ścieraniem lub skrócenie okresu między poszczególnymi
konserwacjami. Zasadniczo pompy przewidziane są do zastosowania w specjalnie zaprojektowanych systemach
studzienek firmy KESSEL (modułach technicznych). Użycie w trybie podsysającym jest niedozwolone. Minimalny
poziom tłoczonego czynnika musi zawsze leżeć powyżej górnej krawędzi obudowy pompy [1]. Do użycia w trybie
S1 obudowa silnika musi być zawsze kompletnie zanurzona. W trybie roboczym S3 (30%) pompa może pracować
również w stanie wynurzonym, przy czym minimalny poziom również w tym przypadku musi być zawsze powyżej
górnej krawędzi obudowy pompy (1). Temperatura tłoczonego czynnika nie może przekraczać 40°C, chwilowo
może wynosić maksymalnie 60°C. Maksymalna gęstość tłoczonego czynnika wynosi 1040 kg/m³, a odczyn pH
musi leżeć między 6 - 11.
3.2
Rodzaje zastosowania
Silnik jest zaprojektowany dla trybu roboczego S1 (tryb stały) o częstotliwości przełączania maks. 15 przełączeń /
godzinę. Instalacja hydrauliczna jest przystosowana do stałego trybu roboczego.
3.3
Budowa
Agregat przystosowany do pełnego zanurzenia składa się z silnika, obudowy pompy i pasującego wirnika.
Wszystkie ważne komponenty są mają duże rozmiary.
Uchwyt
Tabliczka
znamionowa
Obudowa pompy
Króciec tłoczny
Wlot kabla
Uchwyt
Obudowa
silnika
Tabliczka
znamionowa
Obudowa pompy
Króciec tłoczny
Wlot kabla
Króciec ssący
Typ STF / STK
Typ STZ
Obudowa
silnika
Ill. [1]
Ill. [2]
1
Nazwa typu
15
Klasa izolacji
2
Numer artykułu
16
Częstotliwość
3
Hmax (wysokość tłoczenia max)
17
Napięcie
4
Hmin (wysokość tłoczenia min)
18
Prąd znamionowy
5
Qmax (ilość przetłaczanej cieczy max)
19
Prędkość obrotowa silnika
6
Temperatura czynnika
20
Kondensator roboczy
7
Ciężar
21
Kondensator rozruchowy
8
Stopień ochrony
22
Moc P1
9
Norma
23
Moc P2
10
Rok produkcji (MM/RRRR)
24
Cos phi
11
Numer seryjny
25 Numer certyfikatu w zakresie bezpieczeństwa
przeciwwybuchowego
12
Laboratorium badawcze (zgodnie z niem.
rozporządzeniem dot. wyrobów budowlanych)
26
Laboratorium badawcze w zakresie
bezpieczeństwa przeciwwybuchowego
13
Typ silnika
27
Oznaczenie w zakresie bezpieczeństwa
przeciwwybuchowego
14
Tryb roboczy
28
Dane dot. obwodu prądowego w zakresie
bezpieczeństwa przeciwwybuchowego