Supplemento per le versioni con protezione antideflagrante
139 / 216
2017/04
010-989
Sicurezza nelle prestazioni di servizio
Attenzione!
Prima dei lavori di servizio o riparazione ai mezzi di esercizio elettrici con protezione antideflagrante, questi
devono essere assolutamente scollegati dalla rete elettrica e messi in sicurezza contro la riaccensione
accidentale. Se il motore si trova in un‘atmosfera a rischio di esplosione, questo dovrà essere rimosso dall‘area
potenzialmente esplosiva prima dell‘apertura. Prima di allentare ed estrarre una pompa ad immersione
motorizzata dal dispositivo automatico di accoppiamento tramite il sistema di scarico a scopo di lavori di revisione
dell‘impianto di pompaggio con protezione antideflagrante, il pozzetto della pompa deve essere assolutamente
ventilato a sufficienza!
Sicurezza dei collegamenti elettrici
Attenzione!
Il collegamento elettrico del mezzo di esercizio al comando dell’impianto può essere eseguito solo nel rispetto
dello schema di collegamento in dotazione. Gli interventi di iniziativa autonoma rappresentano un potenziale
pericolo per la salute e la vita e, in generale, invalidano la garanzia! Ogni motore sommerso con protezione
antideflagrante è dotato di un termointerruttore bimetallico o di termoelementi (resistenza PTC) quali limitatori di
temperatura. Questi devono essere assolutamente collegati nel rispetto dello schema elettrico originale, in modo
che, in caso di raggiungimento della temperatura critica, sia efficace un blocco automatico contro la riaccensione.
Dopo l‘avvenuta eliminazione dei guasti o dei danni, il motore sommerso con protezione antideflagrante deve
essere ricollegato manualmente alla rete elettrica.
10.4 Condizioni derivanti dall’attestato di esame del tipo UE
Descrizione dei sistemi di raffreddamento del motore
Le pompe ad immersione motorizzate con motore ad immersione AM ....../...EX sono composte da una parte della
pompa idraulica accoppiata
a un motore a 3 fasi tramite un albero motore comune. Il motore è equipaggiato con un cavo di potenza fissato
permanentemente.
Le serie di motori ad immersione AM....../..EX sono raffreddate dal liquido pompato e sono adatte a un funzionamento
continuo S1 con motore completamente sommerso per il trasporto di acque di scarico gregge con fango e corpi
solidi. Le pompe con motori emersi sono progettate per il funzionamento S3.
Determinazioni
Al fine di assicurare il funzionamento regolare e sicuro degli apparecchi, le istruzioni per il montaggio del produttore
devono essere assolutamente seguite. Devono inoltre essere rispettate le direttive di installazione vigenti localmente!
Per il controllo diretto della temperatura, i motori ad immersione sono dotati di limitatori di temperatura
nell’avvolgimento di statore. Il livello della temperatura limite è ricavabile dalla tabella 1 in allegato! Le pompe ad
immersione motorizzate possono essere dotate in via opzionale di elettrodi rilevatori e interruttori di livello interni.
Attenzione!
Per i motori ad immersione azionati attraverso una regolazione della frequenza, la classe di temperatura è T3! La
frequenza indicata sulla targhetta non può essere superata nel funzionamento con convertitore!
Indicazioni di installazione
Attenzione!
La prontezza al funzionamento e l’efficacia della regolazione del livello di riempimento devono essere verificate in
cicli di monitoraggio regolari. Un’ispezione completa deve essere eseguita almeno ogni 3 mesi!