General information
41 / 216
2017/04
010-989
1.2.5 Exclusion of liability
No warranty or liability are accepted for damage to the product if one or more of the following points apply:
• Faulty design by ourselves on account of poor and/or incorrect specifications by the operator or client
• Non-observation of the safety notes, regulations and necessary requirements applicable according to German
law and these operating instructions.
• Inappropriate storage and transport
• Incorrect assembly/removal
• Poor maintenance
• Inappropriate repairs
• Poor foundations or construction work
• Chemical, electrochemical and electrical influences
• Wear
In the event of a power failure or other technical fault due to which the correct operation of the pump is no longer
guaranteed, care must always be taken that potential damage caused by the pump chamber overflowing is
safely prevented e.g. by installing an alarm circuit that works without mains voltage or other suitable protective
measures.
The manufacturer liability thus excludes any liability for personal injury, property damage and/or financial losses.
1.2.6 Manufacturer’s address / Customer service:
KESSEL AG, Bahnhofstrasse 31, D-85101 Lenting
Phone +49 (0) 8456/27-462 · Fax +49 (0) 8456/27-173
E-mail: [email protected], Homepage: www.kessel.de
