30 / 216
Zusatz für Ex-geschützte Ausführungen
2017/04
010-989
Definition der Zündschutzart
Die konstruktive Ausrichtung für den Ex-Schutz der von KESSEL gefertigten explosionsgeschützten Betriebsmittel
wird durch die
Zündschutzart: Druckfeste Kapselung „d“ erreicht. Hierbei sind die Teile, die eine explosionsfähige Atmosphäre
zünden können, in einem Gehäuse angeordnet, das bei der Explosion eines explosionsfähigen Gemisches im
Innern deren Druck aushält und eine Übertragung der Explosion auf die das Gehäuse umgebende explosionsfähige
Atmosphäre verhindert.
Betriebsmittel die über einen separaten Anschlussraum verfügen, genügen zusätzlich den Anforderungen der
Zündschutzart: Erhöhte Sicherheit „e“.
Werden Messleitungen zum Anschluss von einfachen elektrischen Betriebsmitteln entsprechend EN 60079-11 Abs.
5.7 durch den druckfest gekapselten Raum geführt (Leitwertmessung, Schwimmerschalter als Leckageüberwachung
usw.), so entsprechen diese den Anforderungen der Zündschutzart: Eigensicherheit „i“.
Zur Einhaltung des Geräteschutzes in explosionsgefährdeten Bereichen für nicht- elektrische Anteile von KESSEL
Betriebsmitteln (mechanischer Ex-Schutz), wird die Zündschutzart Konstruktive Sicherheit “c“ angewendet.
Hierbei werden konstruktiv bauliche Maßnahmen ergriffen, welche durch ausreichende Dimensionierung der
Bauteile, Schutz gegen mögliche Entzündungen durch bewegte Teile, erzeugte heiße Oberflächen, Funken und -
adiabatische Kompression sicherstellt.
Zertifizierung
Von der DEKRA CERTIFICATION B.V. in Arnheim / NL sind den explosionsgeschützten Tauchmotorpumpen EG-
Baumusterprüfbescheinigungen ausgestellt.
DEKRA 16 ATEX 0086X
DEKRA 16 ATEX 0087X
DEKRA 16 ATEX 0088X
DEKRA 16 ATEX 0089X
(siehe Typenschild).
Zusammen mit der Mitteilung über die Anerkennung der Qualitätssicherung Produktion und der Konformitätserklärung
gemäß EN 17050 des Herstellers darf rechtlich gemäß Richtlinie RL 2014/34/EU das explosionsgeschützte
Betriebsmittel in den Warenverkehr bzw. in Betrieb genommen werden.
Kennzeichnung der explosionsgeschützten Tauchmotoren (Siehe Konformitätsbescheinigung)
Achtung!
10.3 Sicherheitshinweise
Generelle Hinweise
Eingriffe in explosionsgeschützte Betriebsmittel dürfen nur durch amtlich anerkannte „Befähigte Personen“ oder
durch uns ermächtigte Werkstätten bzw. Personen ausgeführt werden. Jegliche Arbeiten, Montagen, Reparaturen,
Service-Leistungen und Beobachtungen sind unbedingt unter Beachtung dieser Betriebsanleitung und der
zugehörigen Dokumentation durchzuführen!