KaVo ESTETICA E70 Vision Скачать руководство пользователя страница 17

Страница: 17 / 178

Instructions for use ESTETICA E70 Vision / E80 Vision

2 Safety | 2.3 Safety instructions

CAUTION

Electrical power.

Electrical shock from incorrectly connecting a non-medical system to the USB
interfaces of the device.

▶

Connect any IT device to the medical system in accordance with IEC
60601-1.

▶

Use USB devices with no additional power supply (USB-powered) only.

▶

Applied parts connected to the USB interface of the dentist element must
comply with the requisite insulation.

▶

USB-powered devices failing to meet the requisite insulation for applied
parts must be placed appropriately such that direct contact of the USB
device and the patient is excluded.

▶

It is not permissible to touch USB-powered devices failing to meet the re-
quisite insulation for applied parts and the patient at the same time.

CAUTION

Sitting down on a dental chair that is in horizontal orientation is asso-
ciated with a risk of injury.

▶

Do not sit on the head or foot end of the patient chair when it is in a hori-
zontal position.

CAUTION

Risk of injury if you support yourself on the swivel arm.

Exposing the swivel arm to an overload may damage the swivel arm and cause
injury to the patient or user.

▶

Never strain the swivel arm, spring arm, assistant element and dentist ele-
ment by using it as a support!

CAUTION

Risk of injury by suspended instruments (S table).

Patients may get injured by sharp instrument tips.

▶

When you move the dentist's unit, make sure that nobody is injured.

▶

Alert patients and care providers to the risk of injury.

CAUTION

Risk of injury during cleaning of the treatment unit.

Lack of instructions to the cleaning staff and lack of preparation of the treat-
ment unit can lead to the cleaning personnel sustaining injuries.

▶

Only trained professionals and instructed cleaning personnel may be
present in the treatment rooms.

▶

Position the chair for cleaning and turn the device off.

17 / 178

Содержание ESTETICA E70 Vision



















































































































































































Результаты поиска

Содержание ESTETICA E70 Vision

Отзывы:

Похожие инструкции для ESTETICA E70 Vision

Бренды по названию

Популярные бренды

KaVo ESTETICA E70 Vision, Инструкция по эксплуатации

Результаты поиска

Содержание ESTETICA E70 Vision

Отзывы:

Похожие инструкции для ESTETICA E70 Vision

Бренды по названию

Популярные бренды