KaVo ESTETICA E70 Vision, Инструкция по эксплуатации

Страница: 120 / 178

Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.14 Using the KL 703 LED in ENDO mode (optional accessory)
120 / 178
▶
All other data must be set manually by the user according to the informa-
tion provided by the file manufacturer. For this purpose, tap on the corres-
ponding column and use the arrow keys to select the desired data value
(torque, speed, file colour).
▶ Tap the "Save" key to terminate the editing of file sequences.
ð
The set data are saved.
▶ Tap the "Cancel" key to quit without saving.
Selecting endodontics file profiles
▶ Open the file editor, then tap file profile "Profile 1" to display the file profile
selection list.
▶
Each file profile has up to 10 files assigned to it. Usually, these 10 files are
used in sequence as determined by the indication.
Changing parameters short-term
▶ Unfold the "Profile" list and select a profile as desired.
▶ Use the "slider" to set the speed and torque.
▶
Select the transmission factor, torque mode and step of the respective file
set using the corresponding list.
Setting the speed
The speed can be varied in the range of 200 min
-1
to 3,200 min
-1
.
▶
Tap the current speed (value in rpm).
ð
The font colour switches to blue.
▶ Use slider to set the speed.
ð
The speed is shown on the display and is effective immediately.