KaVo ESTETICA E70 Vision, Инструкция по эксплуатации

Страница: 115 / 178

Instructions for use ESTETICA E70 Vision / E80 Vision
4 Operation | 4.14 Using the KL 703 LED in ENDO mode (optional accessory)
Note
The INTRA LUX KL 703 LED motor has a maximum torque range from 0.15
to 3 Ncm. If the torque is in excess of 2.0 Ncm, KaVo recommends using a
reducing contra-angle handpiece 3:1 or 8:1 in order to reduce the load on
and heating of the motor.
The reducing contra-angle handpiece should be selected appropriately such
that the torques specified by the file manufacturer are within the recommen-
ded torque range (middle column):
Reduction ratio of con-
tra-angle handpieces Torque of the file Minimum/maximum
attainable torques
1:1 (M20 L with L68 B)
1:1 (S20)
1:1 (S20 S) 0.15 – 2.0 Ncm 0.15/3.0 Ncm
3:1 (M20 L with L66 B) 0.5 – 6.0 Ncm 0.45/6.0 Ncm
8:1 (ENDO S81) 1.5 – 6.0 Ncm 1.2/6.0 Ncm
Technical specifications for the KL 703 LED in ENDO
mode
Note
The technical specifications apply to the KL 703 LED in ENDO mode.LED
Speed range 200 to 3,200 min
-1
Maximum torque 3 Ncm
Operating mode
Note
30 seconds operating time/9 minutes pause is the potential load threshold of
the motor (full load at maximum speed).
In practice, pulse loads lasting seconds or pause times lasting seconds or
minutes are realistic given that the maximum possible motor current is not nor-
mally reached. This equates to the dentist's normal way of working.
4.14.2 Setting the storage position of the endo-motor
▶ Tap the "Settings" tab.
▶ Tap the "User" key and call up the settings of the desired dentist. Select the
"Endodontics" treatment mode.
ð
This causes the settings of the "Endodontics" treatment mode to be dis-
played.
▶
Tap the "Set storage position" key.
This opens a dialog field.
▶
Take the appropriate motor for the Endodontics treatment mode from the
holder, and confirm.
▶ Switch the operating light on or off.
▶
Tap the "Back" key to return to the "Treatment" menu.
115 / 178