INSTALLATION 3-1
_______________________________________________________________________
Copyright © 2010 by Kaufman & Robinson, Inc., 1306 Blue Spruce Drive, Unit A, Fort Collins, CO 80524
Tel: 970-495-0187, Fax: 970-484-9350, Internet: www.ionsources.com
3 INSTALLATION
This section describes how to install the Kaufman & Robinson, Inc., KRI® Control-
ler package for the
fi
lament cathode version of the End Hall Ion Source.
3.1 Unpack
Unpack the Controller package for the End Hall Ion Source. Prior to shipment,
the Controller was tested with the ion source to insure quality and verify the
standard range of operation. As soon as the Controller has been completely
removed from all packing materials, a visual inspection should be made to de-
termine if there has been any damage to the components during shipment. Use
the packing lists provided to con
fi
rm the completeness of order. If any damage
has occurred, contact Kaufman & Robinson, Inc., in addition to the shipping
company, to report the damage - see Section 8. Retain packaging materials for
any future shipments.
Table 3-1 is an inventory list for the controller package. The inventory list is for
the standard package so some items may or may not be included depending
on the particular order. For any questions or discrepancies concerning either
the inventory or shipping list, see Section 8 to contact Kaufman and Robinson,
Inc. Refer to Section 2 – General Description and Speci
fi
cations for additional
information about the controller.
Table 3-1 Controller Inventory List
Quantity
Description
Part Number
1
Filament Power Supply
FC 1000/Z or F 1006/Z
1
Power cable
fi
lament controller
CBL-A07-PWR-HF-EH
1
Discharge Power Supply
DC30010 or DC3005
1
Power cable, Discharge PS
6 m (20 ft) cable, 3 conductor
CBL-A08-PWR-DS-EH
(May vary)
1
Auto controller
AC-01
1
Power cable, auto controller
CBL-A01-PWR-GC
1
Mass
fl
ow controller
MF-KRI-XXXX
(May vary)
1
Mass
fl
ow controller cable
6 m (20 ft) cable
CBL-BKS-GC
(May vary)
1
Operating cable,6 m (20 ft) cable
CBL-A04-ATM-HF-EH
(May vary)
2
Interface cable, RS-485 (2 feet)
CBL-IFC-485
