Karl Storz AUTOCON II 400, Руководство по обслуживанию

Страница: 169 / 204

12.06 / V1.0
3-11
AUTOCON ® II 400
MODEL 205352 20-1
Error code Description of error Solution Priority
I-81 Short circuit in instrument interface
Arrange for Black Box to be tested and
replaced if necessary
Low
I-82 Short circuit in activation recognition
Arrange for Black Box to be tested and
replaced if necessary
Low
I-83 Cut-off in activation recognition
Arrange for Black Box to be tested and
replaced if necessary
Low
I-84 Instrument interface: R-Window
Arrange for Black Box to be tested and
replaced if necessary
Low
I-85 Short circuit in activation recognition
Arrange for Black Box to be tested and
replaced if necessary
Low
I-86 Illegal activation type
Arrange for Black Box to be tested and
replaced if necessary
Low
I-87 Framing error
Arrange for Black Box to be tested and
replaced if necessary
Low
I-88 Parity error
Arrange for Black Box to be tested and
replaced if necessary
Low
I-89 Unknown ECB identifier
Arrange for Black Box to be tested and
replaced if necessary
Low
I-8A CRC error in instrument recognition
Arrange for Black Box to be tested and
replaced if necessary
Low
I-8B Instrument interface: R_S3
Check connected instrument and
replace if necessary
Low
I-8C
Non permissible socket module
recognized Arrange for Black Box to be tested and
replaced if necessary
Low
I-8D Instrument interface: R_S4
Check connected instrument and
replace if necessary
Low
I-8E Instrument interface: R_S8
Check connected instrument and
replace if necessary
Low
I-90 EEPROM write error
Arrange for Black Box to be tested and
replaced if necessary
Low
N-01 Interrupt error
Arrange for Black Box to be tested and
replaced if necessary
Low
N-02 CRC error following a reset
Arrange for Black Box to be tested and
replaced if necessary
Low
N-03 +5 V too low
Arrange for Black Box to be tested and
replaced if necessary
Low
N-04 +5 V too high
Arrange for Black Box to be tested and
replaced if necessary
Low
N-05 Undervoltage of ±12 V
Arrange for Black Box to be tested and
replaced if necessary
Low
N-06 Overvoltage of ±12 V
Arrange for Black Box to be tested and
replaced if necessary
Low
N-07 Current for NE monitor absent
Arrange for Black Box to be tested and
replaced if necessary
Low
N-08 SPI receive error
Arrange for Black Box to be tested and
replaced if necessary
Low
N-09 Stack error
Arrange for Black Box to be tested and
replaced if necessary
Low
N-0D Error in state variable
Arrange for Black Box to be tested and
replaced if necessary
Low
N-0E CRC error during operation
Arrange for Black Box to be tested and
replaced if necessary
Low
N-10 Defective current sensor 1
Arrange for Black Box to be tested and
replaced if necessary
Low
N-11 Defective current sensor 2
Arrange for Black Box to be tested and
replaced if necessary
Low
Caution: Always unplug the device from the power supply before carrying out any
repairs on it!