Kantronics KAM 98 Скачать руководство пользователя страница 78

Страница: 78 / 384

• attach the wire from pin 1 (transmit audio) on

the DB-9 to the microphone connector’s input

pin,

• attach the wire from pin 3 (push-to-talk) on the

DB-9 to the microphone connector’s PTT or

STBY pin,

• (optional) for base or mobile units, attach the

wire from pin 9 (one path to ground) on the

DB-9 to the ground pin on the microphone con-

nector.

Connecting your Transceiver’s Speaker Plug to Your KAM’98

Use the speaker plug cable supplied with the KAM’98 (or an appropriate third

party speaker plug) and the notes taken earlier to do the following wiring to the

DB-9 connector:

Step 1.

Locate the wire that connects to the tip of the external

speaker jack and wire it to pin 5 on the DB-9 (Receive

Audio)

Step 2.

Locate the wire that connects to the sleeve of the exter-

nal speaker jack and wire it to pin 6 on the DB-9

(Ground)

This is all you need to do to wire the speaker plug part of the assembly.

Important:

Keep your wiring notes for future reference.

Installing Your KAM’98

Connect Your KAM’98 to Your Transceiver

User’s Guide

KAM’98 v 8.3

Содержание KAM 98

































































































































































































































































































































































































Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды

Kantronics KAM 98, Руководство пользователя

Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды