Kantronics KAM 98 Скачать руководство пользователя страница 310

Страница: 310 / 384

PBHOLD

{ON | OFF}

default ON
When ON, any message received over the radio will automatically be held by

your PBBS for you to review. You may then release the message for forwarding

by editing it and changing the H flag (for example, to edit message number 4: E 4

H). When OFF, messages received over the radio are not held, but may immedi-

ately be forwarded from your PBBS. (Note that any message addressed TO or

@ your MYCALL or MYPBBS call will be held regardless of the setting of

PBHOLD.)

PBKILLFW

{ON | OFF}

default ON
When OFF, Private and Traffic messages will not be deleted (killed) from your

PBBS after they have been forwarded, but will be marked with an F flag (for-

warded). When ON, Private and Traffic messages will be deleted from the PBBS

after they have been successfully forwarded.

PBLIST

[ON | OFF] [NONE | {+|-}callsign |

callsign1,callsign2...]

default OFF NONE
The front panel of your TNC has a mail-status indicator that blinks when there

is unread mail in your PBBS addressed to your callsign (MYCALL) or to your

MYPBBS. And several PBBS commands (LISTMINE, READMINE, and

KILLMINE) operate on mail addressed to your callsign (MYCALL) or to

your MYPBBS.
PBLIST allows you to add up to ten more callsigns to the set of callsigns

included as “mine” for use with the “mail” indicator and the PBBS commands

(LISTMINE, READMINE, and KILLMINE). The PBLIST command has two

parameters: one for creating, changing, or deleting the list of callsigns on the

Command Reference

KAM’98 Commands

User’s Guide

292

KAM’98 v 8.3

Содержание KAM 98

































































































































































































































































































































































































Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды

Kantronics KAM 98, Руководство пользователя

Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды