Kantronics KAM 98, Руководство пользователя

Страница: 269 / 384

+ This command is used to define how date and time are to be displayed; it is not
used to enter an actual date and time (which you do by using DAYTIME). If you
enter an actual date and time with the DAYSTR command, your clock will ap-
pear to stop.
See also: daytime
#
DAYTIME yymmddhhmm[ss]
DAYTIME is used to enter a date and time (after which time and date are format-
ted for display by the specifications given in DAYSTR).
When date and time are entered, using the input format specified in the command
and explained below, the values entered are used to set the software clock/calen-
dar. The software clock/calendar is then used for MHEARD and NDHEARD log-
ging, as well as for CSTAMP and MSTAMP functions.
When entering the daytime digits, enter them in pure number sequence with no
spaces, dashes, or slashes. Notice that there are two digits each for entering a
year, month, day, hour, minute, and (optionally) second. Also, notice that you
need to use the order given here, which has nothing to do with the format (given
in DATSTR) for displaying date and time values. For example, to enter 1986,
January 2, at 22:30:00 hours, the value of the DAYTIME parameter would be
860102223000. In this case, seconds were entered, so the string is 12 characters
long (2 characters for each of six pieces of information entered).
If DAYTIME is entered with no parameter, the daytime is displayed using the
format defined by the DAYSTR command.
+ Hint: If the time appears to be stuck, check the current value of DAYSTR, to be
sure that the DAYSTR setting is being used to format the display of time and
date, and not (in error) to attempt to supply an actual date and time. If this is not
the case, fix the problem and see if time and date displays work correctly.
See also: cstamp, daytweak, daystr, mheard, mstamp
KAM’98 Commands Command Reference
KAM’98 v 8.3 251 User’s Guide