Kantronics KAM 98 Скачать руководство пользователя страница 234

Страница: 234 / 384

as SP, Grafik Packet and ESKAY, some of which make use of the KISS mode

feature of the TNC.
To use the DAMA system, the user connects to the DAMA master with a normal

connect frame. When the master responds to the connect frame, the TNC is auto-

matically placed into DAMA slave mode. The DAMA master polls each slave

within the LAN in a “round-robin” fashion (somewhat like the token passing

method) and the slave TNCs transmit packets when the master has granted per-

mission to do so. The slave TNCs continue to be polled with priority among the

slaves assigned according to the number of times each responds with information

frames (as opposed to rr frames - i.e., no data to send). Priority is dynamically

assigned so that those stations that are sending information are polled more fre-

quently than idle stations. However, once an “idle” station responds with infor-

mation, its priority is upgraded.
Communication over the wider area is handled between the DAMA master nodes

which are connected to each other using a standard NET/ROM

™

type protocol.

For the DAMA system to work effectively, each slave associates with only one

master node and connects only to that master. If an end user is connected to

more than one master,

each

master will poll the slave TNC according to its poll-

ing schedule. When polled, the slave TNC will transmit

all

frames it has avail-

able to whichever master polls it. This would increase the probability of

collisions with other users, thus defeating the purpose of the DAMA system.

How is DAMA Implemented in Kantronics TNCs?

Most Kantronics TNCs, including the KPC-3 Plus, KPC-9612 Plus, and the

KAM Plus, implement the DAMA slave mode, using the following commands

(see the Command Reference section for details):

DAMA {ON|OFF}

Set DAMA to ON to have your Kantronics TNC operate as a DAMA slave sta-

tion once a connection is established with a DAMA master station. When

DAMA is OFF, the TNC will operate in it’s carrier sense multiple access mode

(CSMA). For details, see the CD, SLOT, and PERSIST commands in the Com-

mand Reference section of this manual.

Packet Modes of Operation

Other Modes of Operation

User’s Guide

216

KAM’98 v 8.3

Содержание KAM 98

































































































































































































































































































































































































Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды

Kantronics KAM 98, Руководство пользователя

Результаты поиска

Содержание KAM 98

Отзывы:

Бренды по названию

Популярные бренды